Innokin is one of the early pioneers of mass-produced regulated vaping devices and requires no introduction whatsoever. What every Innokin MVP series fan has been for has happened – Innokin released the 5th generation mod of their highly appraised MVP series – MVP5 Ajax Kit. To begin with, it has the largest battery capacity we have yet seen – an impressive 5200mAh built-in battery which is capable of bringing a powerful draw for each puff and doubles as a power bank to charge your USB powered electronic devices. Innokin MVP5 Ajax is not just a vape mod kit, it has been redesigned and upgraded with a rugged and solid exterior and a ton of extra features for outdoor activities, but we will get back to that later.
The Innokin MVP5 Ajax has three power modes with Temperature control and TCR mode. The wattage presets provide you with the optimal vaping experience, therefore, you don’t have to be a vaping geek to be able to find the right settings. More toys, like Sensor Suite for compass, thermometer, barometer and altimeter sensor and a brig9ht LED torch with six different modes are all part of this mod. Paired with the 2ml Innokin Ajax tank with the Ajax Plex3D Coil, the Innokin MVP5 Ajax produces flavourful and rich vapour for best direct-to-lung vaping.
Innokin MVP5 Ajax Kit Contents:
- 1x MVP5 mod
- 1x Ajax tank
- 1x Ajax Plex3D 0.35 ohm mesh coil (30-55W)
- 1x Ajax Plex3D 0.16 ohm mesh coil (50-80W)
- Extra bubble glass
- Lanyard/USB-C cable
- Spare parts bag
- User manual
- Safety card
Innokin MVP5 Ajax Vape Mod Specifications
- 5200mAh Built-In Battery
- 120W Max Output
- Durable Box Mod Design
- OLED Screen
- Large Firing Button
- Operational Buttons
- Variable Wattage
- Temperature Control
- Memory Mode
- Curve Mode
- 6 Flashlight Modes
- Sub Ohm Compatible
- 2ml E-Liquid Capacity
- Dual Adjustable Bottom Airflow
- Top Slide Refill
The Look and Feel of the Innokin MVP5 Ajax Vape Mod
The Innokin MVP5 shouts quality straight away out of the box. Materials used just feel much better than most mods. High-gloss plastic top and bottom of the mod looks very nice, though can be scratched pretty easily. The sides are durable matte plastic which should be more scratch-resistant, but eventually, time will tell. Also thanks to matt finish it is not slippery to hold. The small resin panel is tasteful and adds a much-needed accent. However, it is truly a “box mod” with rather sharp edges so it is not ergonomic and too comfortable to hold especially in a small hand.
Although the mod is built from high-quality materials, the buttons are not and that is the biggest con of this mod. They wobble and feel pretty cheap. Although it doesn’t affect the use of the mod, still, if using high-quality materials, why not use them throughout the product?
At the top, there is a gold plated 510 connector on one side and a flashlight on the other. The bright 1.14-inch screen under the fire button displays the vaping information such as wattage, battery life, time and date, resistance. At the base of the mod, there is a USB port sealed by a rubber plug.
Innokin MVP5 Battery Life
Using the Innokin MVP5 Ajax Kit
The menu system of MVP5 is very straightforward and easy to use. There are wattage modes, TC mode, cut off, puffs count, display settings and sensors in the menu. The sensor mode provides you the compass, temperature, elevation, and barometric pressure for outdoors.
Three clicks on the fire button to turn on or turn off the mod. Three clicks on the central button to enter into the menu system. The screen then shows: Wattage, TC Mod, Cut Off, Puffs, Display, Sensors, and System. The MVP5 Ajax Mod will detect the coil and set the optimal wattage automatically with Ajax tank or Z-Coil. The wattage ranges from 6W to 120W in 0.5W increments.
Innokin Ajax Tank
The Innokin Ajax Vape Tank features a great balance between flavour and vapour production, using the included Ajax Plex3D Coils. TPD version of the Ajax tank features a 2.0ml e-Liquid capacity that may be filled using the convenient sliding top fill design. The Ajax is designed for direct to lung users with dual airflow slots that may be adjusted down to your personal preferences.
Innokin Ajax Tank Specifications:
- Base Diameter: 24mm
- 510 Threaded
- E-Liquid Capacity: 2.0ml in “TPD” Compliant standard version
- Sliding Top Fill Design
- Glass Tank
- Dual Airflow Slots
- Bottom Adjustable Airflow Control Valve
- Designed for DTL (Direct-to-Lung) use
- Includes 1x Ajax Kanthal Plex3D Matrix Coil 0.16ohm coil (Pre-installed) (50 – 80W)
- Includes 1x Ajax Kanthal Plex3D Coil 0.35ohm coil (30 – 55W)
- 510 Drip Tip Compatible
- Good build quality
- Packed with features and functions
- LED torch and sensor suites for outdoors
- 5200mAh battery that can be used as a power bank
- 1.14-inch screen with user friendly menu system
Last Word on the Innokin MVP5 with Ajax Tank
The Innokin MVP5 truly stands out as a quality vape mod that is packed with features. Paired perfectly with the Ajax Sub-Ohm Tank MVP5 provides phenomenal vapour and flavour production.
Not only is the MVP5 a vape mod box, it’s a valuable accessory that you’ll never want to be without. Whether you’re a rugged outdoorsman or or savvy metropolitan the Innokin MVP5 delivers durability and functionality that are unsurpassed.
Do we recommend it? Definitely.